Use the SpotLine M110 terminal base unit to create your own fast (10Mbps) and economical network color terminal solution simply by adding a standard PC keyboard and VGA monitor. Connect directly to your TCP/IP Ethernet LAN and run up to 8 simultaneous Telnet sessions.

The SpotLine M110's SCO ANSI, IBM 3151, and VT100, VT220, and VT320 emulators make the terminal ideal for today's modern network and multi-user environments. And all your applications that were designed for DEC VT 52, VT100, VT220, VT320, IBM 3151, ANSI/SCO, Z29 or similar terminals will work without any modifications. Thanks to the support for standard monitors, keyboards and peripherals you will only have homogeneous components to service and support.

A complete, but simple network configuration setup utility makes for fast and easy installation,even for the terminal's own local serial and parallel devices.

In addition, the very fast display and the SpotLine M110's excellent Price/Performance ratio provide an unbeatable network terminal solution for all your low-cost needs. Ideal for use with SCO UNIX, XENIX, AIX, HP-UX, VMS, Windows NT and other operating systems.

Sample Configuration

Specifications

Display

Monitor: Standard VGA color monitor. Supports 800x600 resolution LCD Analog signal input monitor.

Color: 16 foreground and 16 background colors.

Frequency: 31.5KHz or 48.1KHz horizontal frequency.

Refresh: 70 Hz or 72 Hz vertical retrace.

Format: Multiple display formats.

Data lines: 24 x 80/132, 25 x 80/132. On screen, 1st is status line. 26th is label line. 42x80/132, 43x80/132. On screen, 1st is status line. 44th is label line. Border 16 colors.

Character font: Native Mode font. PC Standard. PC Multinational. Standard ASCII. Standard ANSI. Graphics font. Four banks downloadable soft font of 128 characters each.

Character attributes: Blink, Reverse, Underline, Highlight/ Dim, Invisible, and any combination.

Cursor attributes: Block or Underline, blink, steady or off, 16 colors.

Line attributes: Double height, double width, combination programmable.

CRT saver: On/off 30 minutes.

Emulations: SCO ANSI and IBM 3151 Emulations; VT100, VT220 and VT 320 Emulations.

Communication

Two connectors for Ethernet: Two 10BaseT RJ45 connectors. Protocol: TCP/IP: RFC 791, 815IP / 802.3, RFC 894 (Ethernet). TELNET: RFC 854, 885, 856, 857. ICMP: RFC 792ARP: RFC 826TCP: RFC 793UDP: RFC 768

Printer Server: Provide LPD: RFC 1179 TFTP: RFC 783

Two serial port connectors: Type: Serial 1: 9-pin male connector with RS-232C for host. Serial 2: 9-pin male connector with RS-232C for serial printer. Baud rates: 75 to 460K bps. Format 7 or 8 data bits with or without parity. 1 or 2 stop bits. Protocol: Handshake: Xon/Xoff,, Xpc, and DTR.

One printer port connector

Type: Parallel port on the 25-pin female connector.

Multiple Host Multiple Sessions: In 80 or 132 column mode, 8 sessions simultaneously.

Keyboard Interface: Enhanced PC/AT KB interface.

Type: Standard PC/AT KB 101/102 keys.

Function key: 12 programmable function keys.

Environment Temperature: Operating: 5 °C to 40 °C Storage: -40 °C to 60 °C

Relative Humidity: Operating: 20% to 80% non-condensing. Storage: 20% to 80% non-condensing

Dimensions (Terminal box): 213mm(W) x 40mm(H) x 134mm(D)

Power Requirement: Full range Adapter98 - 264 Vac at 47 - 63 Hz